Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - FingerTech

Pages: [1] 2 3 ... 11
1
Event Results / Kilobots XL
« on: November 19, 2018, 11:01:03 pm »
Kilobots XL
2018-09-16
1, Steamed Hams, The Snip
1, AbsurdiTi, Tiger Shark
1, Speed Wedge 1, The Minions
1, Blue Steel, Mega London
1, Metroid, MangoMinute
1, Pushy Wushy, Number 2
1, Chomper, Super Nintendo Chalmers
1, Steamed Hams, FireAnt
1, The Minions, Tiger Shark
1, Mega London, MangoMinute
1, Metroid, Blue Steel
1, Speed Wedge 1, AbsurdiTi
1, Number 2, Super Nintendo Chalmers
1, Pushy Wushy, Chomper
1, Blue Steel, The Minions
1, AbsurdiTi, Mega London
1, The Snip, Chomper
1, FireAnt, Number 2
1, Steamed Hams, Speed Wedge 1
1, Metroid, Pushy Wushy
1, Blue Steel, The Snip
1, Metroid, Steamed Hams
1, Pushy Wushy, Blue Steel
1, FireAnt, AbsurdiTi
1, Speed Wedge 1, FireAnt
1, Speed Wedge 1, Pushy Wushy
1, Speed Wedge 1, Steamed Hams
1, Speed Wedge 1, Metroid
1, Metroid, Speed Wedge 1
1, Dizzy Demise, Rainbow Barf
1, Treadnought, Cupcake
1, Cookie, Chop
1, Goldrush, Spin
1, Chop, Rainbow Barf
1, Spin, Cupcake
1, Cookie, Dizzy Demise
1, Chop, Treadnought
1, Spin, Dizzy Demise
1, Chop, Spin
1, Goldrush, Cookie
1, Chop, Cookie
1, Goldrush, Chop
3, NightWing, DK Jr.
3, Limblifter, Mega Don G
3, Utopia, EXERCISE RESTRAINT
3, Low Blow, Maul
3, The Butcher, Dempsey Roll
3, Wilson, Dr. Horrible
3, InsaniTi, Hoot
3, Unknown Avenger, Excalibur
3, Excalibur, DK Jr.
3, Utopia, Low Blow
3, Reckoning, Limblifter
3, Wilson, The Butcher
3, EXERCISE RESTRAINT, Maul
3, Unknown Avenger, InsaniTi
3, Excalibur, Hoot
3, Dr. Horrible, Dempsey Roll
3, Mega Don G, NightWing
3, Reckoning, Utopia
3, Unknown Avenger, Wilson
3, Limblifter, EXERCISE RESTRAINT
3, InsaniTi, Dr. Horrible
3, Low Blow, Mega Don G
3, Reckoning, Unknown Avenger
3, InsaniTi, Excalibur
3, Limblifter, Low Blow
3, Utopia, InsaniTi
3, Wilson, Limblifter
3, Utopia, Wilson
3, Unknown Avenger, Utopia
3, Reckoning, Unknown Avenger
0, Nibbles, Stumpy Unleashed
0, Scoop, Beaky
0, Pissed Off Unicorn, Derpy Dozer
0, Troubleshooter, IntensiTi
0, Beaky, Stumpy Unleashed
0, Derpy Dozer, IntensiTi
0, Pissed Off Unicorn, Troubleshooter
0, Scoop, Nibbles
0, Beaky, Troubleshooter
0, Pissed Off Unicorn, Scoop
0, Derpy Dozer, Beaky
0, Derpy Dozer, Scoop
0, Pissed Off Unicorn, Derpy Dozer

2
SCRC (Saskatoon Combat Robotics Club) / Re: Guava Fleet
« on: September 19, 2018, 02:45:53 pm »
Gluing the snap rings in place?  And that isn't a pain in the butt when you need to change a tire?

NightWing would have definitely fought MangoMinute.  We need a grudge sign-up sheet next time for people to see who is available!

3
It's that time of year again! September 15-16 is the 2018 Canadian National Championship! This will be the 40th Kilobots Combat Robot Tournament hosted by the SCRC Kilobots (Saskatoon Combat Robotics Club) and takes place at the Saskatchewan Entertainment Expo - over 16,000 attendees there for costumes, celebrities, comics, sci-fi, gaming and Kilobots!
Test your mettle (and metal!) against the best 150g, 1lb and 3lb robots in Canada and see if you can get your name engraved on the Kilobots Cups.  There are still a few registration spots open!

Are there Prizes? Why yes!!
Big Blue Saw - $330 in gift certificates,
Robot MarketPlace - $330 in gift certificates,
Pololu Robotics and Electronics - $660 in parts,
Equals Zero Designs - TWO Brushless RageBridge ESCs valued at $395,
ServoCity - $330 worth of robot parts,
FingerTech Robotics - $250 in gift certificates plus multicolored light-up acrylic trophies.
Plus all attending teams get free SCRC merchandise!

The full event will be televised by a professional film crew and also streamed worldwide over Twitch.tv!
Tune in September 15-16, 2018
Saturday 10:00 AM - 6:00 PM
Sunday 10:00 AM - 5:00 PM


4
Event Results / Kilobots XXXVII
« on: October 02, 2017, 06:40:10 pm »
Kilobots XXXVII
2017-09-16
1, Tiger Shark, Bing Bang (Boom)
1, Mulletron, The Minions
1, FireAnt, Mega Looon
1, Blue Steel, Mega London
1, Chomper, Ting Tang
1, √v wedge 1, Odium
1, Iron Infidel, All Defense
1, AbsurdiTi, Mack
1, Metroid, Mulletron
1, Tiger Shark, Parallelobot
1, FireAnt, Sam
1, Mack, Mega Looon
1, Mulletron, Bing Bang (Boom)
1, The Minions, Parallelobot
1, AbsurdiTi, Blue Steel
1, Chomper, Tiger Shark
1, Iron Infidel, FireAnt
1, Metroid, √v wedge 1
1, Odium, Mulletron
1, All Defense, Sam
1, The Minions, Ting Tang
1, Mack, Mega London
1, AbsurdiTi, Chomper
1, Metroid, Iron Infidel
1, √v wedge 1, All Defense
1, Blue Steel, The Minions
1, Mack, Tiger Shark
1, Odium, FireAnt
1, Metroid, AbsurdiTi
1, Blue Steel, Mack
1, √v wedge 1, Odium
1, Iron Infidel, Blue Steel
1, √v wedge 1, Chomper
1, √v wedge 1, Iron Infidel
1, AbsurdiTi, √v wedge 1
1, Metroid, AbsurdiTi
1, DERP bot, Cookie
1, Chop, Sawful
1, Mini Turtle, Spin
1, Lift, Cupcake
1, Chopper, Mini Turtle
1, Dizzy Demise, Chop
1, DERP bot, Rainbow Barf
1, Cupcake, Sawful
1, Mini Turtle, Cookie
1, Spin, Rainbow Barf
1, Lift, Chopper
1, DERP bot, Dizzy Demise
1, Spin, Dizzy Demise
1, DERP bot, Lift
1, Cupcake, Mini Turtle
1, Chopper, Cupcake
1, Chopper, Spin
1, Chopper, Lift
1, DERP bot, Chopper
3, Utopia, InsaniTi
3, Broadside, The Butcher
3, Scary Thing, Mega Don G
3, Utopia, Launchpad
3, Scary Thing, Bloodless
3, Dr. Horrible, Icky Mouse
3, Dr. Horrible, Super Shooter McGavin
3, Launchpad, Animus
3, Killer Turtle, Unknown Avenger
3, Utopia, Broadside
3, Launchpad, The Butcher
3, Launchpad, Unknown Avenger
3, Utopia, Killer Turtle
3, Scary Thing, Dr. Horrible
3, Super Shooter McGavin, Mega Don G
3, InsaniTi, Bloodless
3, Broadside, Launchpad
3, Utopia, Scary Thing
3, Super Shooter McGavin, InsaniTi
3, Broadside, Dr. Horrible
3, Killer Turtle, Super Shooter McGavin
3, Killer Turtle, Broadside
3, Killer Turtle, Scary Thing
3, Utopia, Killer Turtle
0, The Grate Gatsby, Stumpy Unleashed
0, Derpy Dozer, Pissed Off Unicorn
0, Troubleshooter, Scoop
0, Beaky, Nibbles
0, Mandy Bulls, Mr. Do
0, The Grate Gatsby, Cracker Jack
0, Pissed Off Unicorn, Scoop
0, Troubleshooter, Derpy Dozer
0, Beaky, Rev
0, Mr. Do, Cracker Jack
0, Pissed Off Unicorn, Rev
0, Nibbles, Derpy Dozer
0, Troubleshooter, The Grate Gatsby
0, Beaky, Mandy Bulls
0, Pissed Off Unicorn, Stumpy Unleashed
0, Mr. Do, Nibbles
0, Troubleshooter, Beaky
0, Pissed Off Unicorn, Mandy Bulls
0, Mr. Do, The Grate Gatsby
0, Pissed Off Unicorn, Mr. Do
0, Pissed Off Unicorn, Beaky
0, Pissed Off Unicorn, Troubleshooter
0, Pissed Off Unicorn, Troubleshooter

5
SCRC (Saskatoon Combat Robotics Club) / Re: Parade Plans
« on: July 30, 2017, 03:37:00 am »
If Brandon can't make it with his sparky bot, we could put CnB in the arena.  We will be moving too fast to answer people asking "they fight in there?!"

6
SCRC (Saskatoon Combat Robotics Club) / Re: Parade Plans
« on: July 25, 2017, 05:05:50 pm »
I'm in.  I didn't mind last year's decorations.  Anything we want to change or add?

We've got heavyweights, but I believe the parade lasts longer than 3 minutes.  :P

7
SCRC (Saskatoon Combat Robotics Club) / Re: SCRC Arena Upgrades 2017
« on: July 25, 2017, 01:12:58 pm »
Scott, these are all control box related.  What do you need to make them happen?

4. A new control box that can run fights independently of a laptop (but can still take laptop inputs, etc).
6. Audio system with cues from the control box
1. ...displaying schedule, brackets, and highlight videos (on the TVs).
5. New arena lights - 12V RGB LED strips that can be controlled via control box.  Possibly individually addressable.
7. Run permanent ready/tap out cables inside frame with connectors on the end.
11. Hazard motors run from ESCs
13. Door lock interrupts so the control box can disable hazards and not start fights until locked.
15. Ref controlled count-out trigger
17. 3 judging tablets/phones, tied into the laptop software.

Let's pick out some LEDs so they can be installed asap.  Re individually addressable: That might actually be easier for you to control versus a pile of fets.

8
SCRC (Saskatoon Combat Robotics Club) / Re: SCRC Arena Upgrades 2017
« on: July 25, 2017, 01:02:43 pm »
1. Four TVs on top of the arena for displaying schedule, brackets, and highlight videos.
Does anyone have a large flat TV they can bring in Sept?

3. A 2ft metal post/stand that raises the spinning red light above the sponsor signs.
Who wants to earn some easy brownie points?

12. New 12V battery and charger
I'll purchase them, but what do we need?

10
SCRC (Saskatoon Combat Robotics Club) / Re: SCRC Arena Upgrades 2017
« on: June 27, 2017, 07:56:06 pm »
Regarding the LED strips, I have a price list from one China company (SE-LED.com) that sells 5050 sized RGBW strips.  They are 60LEDS/m, 17W/m.  Works out to around $7.50/m (CAD currency).  Part number is SELS-5050RGBNW30-12 if you're looking.
If we space them every 6", that's <40m which would cost $300.  15% cheaper if we don't want silicone coating to waterproof it, but I'd think we want that.
I'm not married to this company so feel free to find cheaper or different strips.

Scott, I've dug up our Facebook thread and copied it below in case you wanted to reference:
Back of napkin here, because I'm totally guessing at most of the numbers, but... those halogens are probably about 350W because we trip breakers if we add anything else, but can run them continually on a single 15A. (So they're probably not 500W.) A typical 350W halogen is around 5000 Lumens. The arena is 6 feet by 8ft? If all of the light from those four halogens is landing in the 4.5M^2 of arena, we have a light level of around 4500lux. That's pretty bright, and I doubt we are actually that high, but I guess that would be a design target for any replacement lights. (Well, since the M^2 doesn't change, we can just aim for 20,000 lumens total.)

11
Costumes, comics, sci-fi, gaming and Kilobots!  With over 16,000 attendees, the Saskatoon Comic & Entertainment Expo is the perfect venue for us to host the Canadian National Championship.  September 16-17 is expected to have over 50 Antweight, Beetleweight, and (the new-to-us) Fleaweight robots fighting it out for prizes and glory!

Register at www.Kilobots.com

12
SCRC (Saskatoon Combat Robotics Club) / Re: SCRC Arena Upgrades 2017
« on: June 22, 2017, 11:44:04 am »
As I go through the videos from last weekend, I've decided to add "18. Audio recordings of the announcer and inside arena (camera sound is not good)"
Bad audio really suckifies the videos.

13
SCRC (Saskatoon Combat Robotics Club) / Re: SCRC Arena Upgrades 2017
« on: June 22, 2017, 01:09:00 am »
Dunno, would it?  I've never hardened anything.  If that part is easy, it would save us from replacing the bearing blocks and pulleys in the hazard assembly.

Would hardening the hazard shafts be easier than embiggening them?

14
SCRC (Saskatoon Combat Robotics Club) / Re: SCRC Arena Upgrades 2017
« on: June 22, 2017, 01:06:47 am »
I'm not writing off a stainless floor.  I'm curious what the cost would be.  Where could we get an estimate?
I would think we take off the top layer of steel and put the stainless onto the bottom layer.  Any reason to keep the extra layer in there?

Stainless floor idea is kind of a joke, we would definitely need to club vote on making changes to the floor. But if I had my way it would be just stainless (i.e. not very magnetic). Other problems is cost and even finding an non standard size sheet (8x6)

15
SCRC (Saskatoon Combat Robotics Club) / Re: SCRC Arena Upgrades 2017
« on: June 22, 2017, 01:03:42 am »
I know a number of English people if we wanted some fancy custom cues.  :)
Also, you can hire someone on Fiverr that will do English accent robotic-synthed voice acting for a reasonable rate.

Thanks Nathan... I was already formulating my reply before I read yours.  Yes, the judging tablets could certainly trigger the "show motion" countdown.  Maybe it could be a two of three situation.  Do we need another "shot clock"? or would audio cues be cool for this?  Can we hire Allison Smith to do all our audio voicing?

Pages: [1] 2 3 ... 11